Instrument Power Supplies
Model 6310A series Programmable DC Electronic Load
- Power rating: 200W, 100W×2(Dual), 30W & 250W, 300W, 350W, 600W, 1200W
- Wide range 0~600V operating voltage
- Up to 8 channels in one mainframe
- Dynamic loading with speeds up to 20kHz
Model 6330A series High Speed DC Electronic Load
- Power rating: 200W, 100W×2(Dual), 30W & 250W, 300W, 350W, 600W, 1200W
- Improve operating speeds of load for auto test system integration
- Synchronous paralleling control
- Synchronous dynamic loading up to 7000W
Model 63200 series High Power DC Electronic Load
- Power rating: 2.6kW,5.2kW,6.5kW,10kW,10.4kW,14.5kW,15.6kW
- Voltage range: 0-80V, 0-600V, 0-1000V
- Master/Slave paralleling control (up to 93.6kW)
- Synchronous dynamic loading control
Model 63600 series Programmable DC Electronic Load
- Power rating: 100W×2(Dual), 300W, 400W
- Sweep function for dynamic loading from 50Hz to 10kHz
- User Defined Waveform function
- CZ mode for turn on capacitive load simulation
Model 62000H series Programmable DC Power Supply
- 5kW/10kW/15kW/up to 1000V
- Easy Master/Slave Parallel & Series Operation up to 150kW
- Voltage & Current Slew Rate Control
- Auto Sequencing Programming: 10 Programs/100 Sequences
Model 62000H-S series Solar Array Simulator
- 5kW/10kW/15kW/up to 1MW
- Fast Transient Response Solar Array Simulation
- Build-in Dynamic MPPT Test Profile for EN50530/ Sandia / CGC-GF004/NB-T32004
- Real-World Weather Simulation
- Support up to six-channel SAS control for multi-MPPT testing
- Shadowed I-V curve output simulation (up to 4096 data points)
Model 62075H-30N Ultra-High Stability DC Power Supply
- 7.5kW/up to 60V
- Current Stability:2.5mA/10ppm
- High Resolution Current Programming & Measurement: 20 bit DAC & 24 bit ADC
- Ethernet/LXI Interface
- Magnet power supply application
Model 62000B series Modular DC Power Supply
- 1.5kW Per Module up to 120kW System
- N+1 Redundancy
- Hot Swappable
- Burn-in and plating application
Chroma Power Supply Instrument offered by MELSS
Model 62000P series Programmable DC Power Supply
- 600W / 1200W / 2400W / 5000W
- Wide Range of Voltage & Current Combinations with Constant Power
- Auto Sequencing Programming: 10 Programs / 100 Sequences / 8 bit TTL
- ISO 16750-2 Starting Profile Testing
Model 61500 series Programmable AC Source
- Output power rating: 500VA ~ 90kVA
- Capable of Power Line Distortion simulation
- Harmonics and inter-harmonics waveform function
- Meet IEC 61000-3-2/3-3/4-11/4-13/4-14/4-28 test requirements
Model 61600 series Programmable AC Source
- Output power rating: 500VA ~ 18kVA
- Output frequency: 15Hz ~ 1.5kHz (61611/61612)
- Capable of delivering high CF current
- Provide single and three phase output capability (61611/61612)
Model 61700 series Programmable AC Source
- Output power rating: 1.5kVA ~ 12kVA
- Three phase output voltage 0 ~ 300V
- Output frequency: 15Hz ~ 1.2kHz
- Capable of Power Line Distortion simulation
Model 6400 series Programmable AC Source
- Output power rating: 1.5kVA ~ 9kVA
- Output frequency: 45Hz ~ 1kHz
- Output voltage: 0 ~ 300V
- Low output distortion < 0.3%
Model 6500 series Programmable AC Source
- Output power rating: 1.2kVA ~ 9kVA
- Programmable Sine/Square/Clipped Sine waveform capability
- Capable of Power Line Distortion simulation
- 30 built-in harmonics waveform
AC Electronic Load
Model 63800 series Programmable AC and DC Electronic load
- Power rating: 1800W, 3600W, 4500W
- Parallel / 3-Phase function (AC mode only)
- Constant & Rectified load modes for AC loading
- CC, CR, CV, CP for DC loading
Power Analyzer
Model 66200 series Digital Power Meter
- Ideal for Energy Star & High Precision Power Measurement
- Meet EN 50564:2011/IEC 62301:2011/SPEC Power requirement for power measurement
Model 66203/66204 Digital Power Meter
- Support power measurement for various wiring mode (1P2W/1P3W/3P3W/3P4W)
- Meet EN 50564:2011/IEC 62301:2011/SPEC Power requirement for power measurement
- Voltage range: 15V ~ 600V / Current range: 5mA ~ 20A
- Support external shunt and CT for high current measurement